--------------------------------------------------------------------------

            YKUSH XS Command Appplication Help

--------------------------------------------------------------------------


Available Commands:
-------------------

ykushcmd ykushxs -d                     Turns DOWN the downstream port


ykushcmd ykushxs -u                     Turns UP the downstream port


ykushcmd ykushxs -g                     Obtains the switching status of
                                        the downstream port
                                        

ykushcmd ykushxs -l                     Lists all currently attached
                                        YKUSH XS boards
                                        

ykushcmd ykushxs -s serial_number -d    Turns DOWN the downstream port for
                                        the board with the specified
                                        serial number
                                        

ykushcmd ykushxs -s serial_number -u    Turns UP the downstream port for
                                        the board with the specified
                                        serial number
                                        

ykushcmd ykushxs -s serial_number -g    Obtains the switching status of
                                        port for the board with the
                                        specified serial number

                                        
NOTE: For Windows operating systems add the .exe extension when calling the ykushcmd command. For example for disconnecting the downstream port the command is as follows.

ykushcmd.exe ykushxs -d







