/testing/guestbin/swan-prep
west #
 ipsec start
Redirecting to: systemctl start ipsec.service
west #
 /testing/pluto/bin/wait-until-pluto-started
west #
 ipsec auto --add westnet-east-sourceip
002 added connection description "westnet-east-sourceip"
west #
 echo "initdone"
initdone
west #
 ipsec auto --up  westnet-east-sourceip
002 "westnet-east-sourceip" #1: initiating Main Mode
104 "westnet-east-sourceip" #1: STATE_MAIN_I1: initiate
106 "westnet-east-sourceip" #1: STATE_MAIN_I2: sent MI2, expecting MR2
108 "westnet-east-sourceip" #1: STATE_MAIN_I3: sent MI3, expecting MR3
002 "westnet-east-sourceip" #1: Peer ID is ID_FQDN: '@east'
004 "westnet-east-sourceip" #1: STATE_MAIN_I4: ISAKMP SA established {auth=RSA_SIG cipher=aes_256 integ=sha2_256 group=MODP2048}
002 "westnet-east-sourceip" #2: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS+UP+IKEV1_ALLOW+IKEV2_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO
117 "westnet-east-sourceip" #2: STATE_QUICK_I1: initiate
004 "westnet-east-sourceip" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0xESPESP <0xESPESP xfrm=AES_CBC_128-HMAC_SHA1_96 NATOA=none NATD=none DPD=passive}
west #
 ip route list
default via 192.1.2.254 dev eth1 
192.0.1.0/24 dev eth0 proto kernel scope link src 192.0.1.254 
192.0.2.0/24 via 192.1.2.23 dev eth1 
192.1.2.0/24 dev eth1 proto kernel scope link src 192.1.2.45 
192.1.2.23 dev eth1  scope link  src 10.199.199.254 
192.9.4.0/24 dev eth2 proto kernel scope link src 192.9.4.45 
west #
 echo done
done
west #
 
